Search Keyword recopper
Total 3 results found. Search for [ recopper ] with Google

Results 1 - 3 of 3
Now we are ready to move on to part 3. Now we going to place the com and the copper anode in the plastic container.Now place the armature just behind the lexan shield that we have glued to the plastic
Monday, 12 February 2007

In part two we are going to prepare the armature.The first thing to do is cut your com on a lathe so that is has clean cut. Now clean it with motor spray. Clean the slots between the completes so that
Monday, 12 February 2007

Disclaimer: If you use this process to recopper you armatures I am not responsible for any loss or harm this process can cause you. You use this on you own risk. Please don’t contact me if you l
Sunday, 11 February 2007

<< Start < Prev 1 Next > End >>

Google AdSense

Tags Clouds