Search Keyword end
Total 23 results found. Search for [ end ] with Google

Results 1 - 23 of 23
...onal centrally mounted shock absorber together with a laterally mounted floating monoshock. The front end of the car is completely adjustable and utilises the now standard fixed lower suspension arms...
Wednesday, 07 April 2010

...may at first glance seem like a simple and traditional design, but that’s where the similarities end. The XII claims to achieve a state of perfection by focusing on well thought-out refinements ...
Tuesday, 23 December 2008

... react faster without cogging and delay (response time is less than 0.000001 sec). There is no more dependency on the type of motor you use nor the speed the car is travelling Compare with traditiona...
Tuesday, 02 December 2008

...ional centrally mounted shock absorber together with a laterally mounted floating monoshock. The front end of the car is completely adjustable and utilizes the now standard fixed lower suspension arms...
Tuesday, 25 November 2008

5. Associated RC12R5
...a 2.5mm woven carbon fiber chassis that utilizes a pivotball link rear suspension that allows for independent adjustments for chassis roll, bump and alignment. Having the ability to make these chassis...
Saturday, 16 February 2008

6. Serpent S120
...nnovations include a centrally mounted tweak adjuster as well as adjustable front suspension with independent upper a-arms and pivot ball mounted steering blocks. High quality carbon fibre and glass f...
Wednesday, 13 February 2008

...eel bearings offer long lasting, low rolling resistance and efficiency. Super lightweight and user friendly aluminium inserts are used to replace normal nuts. Unique 1-piece graphite rear axle with ...
Saturday, 12 January 2008

...e performance proven CRC red anodized aluminum parts and Associated's race winning pro-strut front end kit. Holes are pre-drilled to allow the mounting of JR-3550, JR-3650, Hitec 225, KO-949, Futa...
Saturday, 17 November 2007

9. The CEFX C12 is Reborn
...scussion about the future of our 1/12 program we decided to leave the C12 as is. It has been a top contender at every race in Stock and 19T and there is no reason to compromise what we feel is one of ...
Monday, 24 September 2007

...lates to off-set some of the weight in the rear of the car. The biggest change on Rev5 is it new front end. The new link front end that was sturdy enough to hold up to the speeds and forces generated ...
Monday, 24 September 2007

11. Vantomme M12
... the chassisline The 'VantommeM12' (2007/09) hit the circuit for the very first time last weekend, this during a 'MRCZ Challenge race' (qualified in 2nd, 3rd in race), battling with C...
Thursday, 20 September 2007

12. A.L.S front end
kimihiko-yano has this new A.L.S front end on sale on their web site. It is made of aircraft grade aluminum. It give you the possibility to adjust ride height with out placing shims to adjust the ride
Tuesday, 03 July 2007

KSG has a setup alignment tool for 12th scale that looks allot like the 10th scale alignment tools. Here is a small description from there site: Camber angle can be adjusted accurately in the range o
Monday, 25 June 2007

14. Novak GTB 4-CELL
...or limit. Like all of Novak's speed controls, the GTB 4-Cell is packed full of features. A user-friendly interface along with 4 different color status LEDs make programming the GTB extremely easy....
Tuesday, 12 June 2007

...erall grip and turning ability  on most type of track surface. The body should be released at the end of June.   Source: RedRC and Potential ...
Monday, 11 June 2007

16. Carpet Ripper 07 - Update
...ated there site with some pictures of the Carpet Ripper 07. The kit comes without the rear axle, front end or t-bar assembly. Source: V-dezign ...
Tuesday, 05 June 2007

Corally finely released its new front end for the Corally SP12X that is based on the ASSO/CRC front end. Corally has always had it own type front but after they won the World Championship using a CRC
Friday, 18 May 2007

...clean it and replace it in the solution. I leave the mature for about 14 -36 hours in the solution. Depending a lot on volt and growth. If you see that the com is not growing remove some solution and ...
Monday, 12 February 2007 the nail polish has been applied. If it gets on the com use acetone to remove it or else you will end up holes. Now we need some copperwire. We need to turn the copper wire around the top of the ...
Monday, 12 February 2007

...d. Now you will need to leave mixture for a couple day so that the Copper sulphate dissolves. You will end up with a blue liquid(see picture). Now you have you Copper sulphate solution which we will u...
Sunday, 11 February 2007

... not make the US type wheels. Both the Euro and US spec have the holes in the front for the Asso front end as been used by David Spashett World Chiampion Car 2006. The US Spec car is more for carpe...
Tuesday, 19 September 2006

22. Corally SP12X
Corally has released it's new 12th scale car. The SP12X should be available at the end of FebCorally has returned to it's original color scheme which was red/silver. The new car looks a lot li
Thursday, 09 February 2006

23. Team Speed Merchant
(Web Links / 12th scale manufacture)
The makers of the speedmerchant REV.4. It is linked based car using the old skool front end.
Thursday, 10 August 2006

<< Start < Prev 1 Next > End >>

Google AdSense

Tags Clouds